Push Button Switch

Push Button Metal Switch

push button metal switch Metal push button switches are wear-resistant, durable and waterproof metal electromechanical components that can operate key functions or simply turn on/off the device. Looking forward to our cooperation!

Request a Quote

Description

1. Product Introduction

push button metal switch It has a black metal shell and a red button on the head, waterproof stainless steel metal 12mm round button switch, high-quality metal material and IP65 waterproof protection, can be used in humid or dusty environments.

2.Product Parameter (Specification)

Thremal current	5A	2A	3A
Contact type	B:1NO+1NC/2NO+2NC	1NO	C:1NO B:1NO+1NC/2NO+2NC
Contact material	Silver plated gold	Silver plated	Silver plated gold
Degree of protection	IP65
Maximum voltage	250VAC/DC
Minimum applicable load	5VAC/DC 1mA
Trminal style	110” solder/Quick connect
Operating temperature	-25℃+55℃
Operating humidity	45-85%RH
Contact resistance	50MQ max
Insulation resistance	100MΩmin(500VDC megger)
Vibration resistance	10to 55Hz amplitude 1.2mm P-P
Degree of protection	>10g
Electrical life	100,000 operations minimum (at full rated load)
Mechanical Life	Maintained:1000,0000perations minimum
	Momentary:1,000,000 operations minimum
	Seleclor/Keylock:250,000 operations minimum
Dielectrical life	Switch unit:2,000VDC,1min between live/dead part and terminals of different poles
	1,000VDC,1minute between terminals of the same pole;
	1,500VDC,1minute between contact and lamp terminals
	lllumination unit:2,000VDC,1min between live part/ground
Soldering temperature	20W/5 seconds or 260℃/3 seconds

3.Product features and applications

push button metal switch Momentary button switch 12 mm mounting hole size. Screw clamp terminals make installation easier. The metal button head is durable and can be pressed for a long time. Metal button head shape: sturdy and durable, matching of black and red colors, operation type: instantaneous. Body material: stainless steel. Protection level: IP65, switch rating: 2A / 36VDC.
Our products push button metal switch have strict specifications, easy-to-operate interfaces, material protection and optimized service life.

4. Product Details

push button metal switch On the front of the button is a round metal actuator, which is easy to press. A 12mm hole can be drilled into any material to hold the hole in place, and there is even a rubber gasket to prevent water from entering the housing.